LiTanglee Motion Tech
For Honda Mobilio Spike GB1 GB2 Series 2002-2008 Smart Power Tailgate Lift Kit by LiTanglee® | Smart Electric Trunk Opener | Fits Mobilio Spike AU, Active, Just Selection Matrix, GB1 GB2 Chassis | Dual Struts | CE Certified
For Honda Mobilio Spike GB1 GB2 Series 2002-2008 Smart Power Tailgate Lift Kit by LiTanglee® | Smart Electric Trunk Opener | Fits Mobilio Spike AU, Active, Just Selection Matrix, GB1 GB2 Chassis | Dual Struts | CE Certified
Couldn't load pickup availability
TECHNICAL SPECIFICATIONS (HONDA MOBILIO SPIKE GB1/2 BOX-VAN ARCHITECTURE)
| Vehicle Platform | Honda 1st Generation "Garage Box" Concept Platform (Classic JDM Multi-Flex Tall Wagon Grid) |
| Full Chassis Matrix | GB1 (1.5L VTEC / i-DSI Petrol FWD Layout) / GB2 (1.5L VTEC / i-DSI Petrol Real-Time 4WD Layout) | 100% Full Series Coverage |
| Engine Family Linkage | 1.5L L15A VTEC Single-Cam Four-Cylinder Naturally Aspirated Petrol Power Systems |
| Global Trim Compatibility | Mobilio Spike AU, A, W, Y Series (Pre-facelift & Late-model Minor Change Project Clean Compatibility) |
| Model Years Covered | 2002, 2003, 2004, 2005, 2006, 2007, 2008 (Full Generational Lifecycle Run Matrix Lock) |
| System Design | Van-Specific Extra-Long Heavy-Duty Dual Electric Struts + Dedicated GB-Series Smart Low-Draw MCU Control Box + Tailored Heavy-Gauge Structural Body Mounting Brackets |
| Control Interface | Add-on Cockpit Premium Dashboard Control Switch, Rear Inner Boot Lid Switch Premium Button Pod, Integrated with Retrofit/Original Keyless Signals (Custom Unlock Signal Matrix Linkage), Optional Smart Foot Kick Sensor |
🌍 Mobilio Spike GB1/GB2 JDM Platform Precision Fit: Masterfully custom-engineered specifically for Honda's legendary 1st generation "Garage-Box" compact van platform. Flawlessly compatible with all Honda Mobilio Spike (GB1 FWD & GB2 4WD Chassis Matrix) variants from 2002 to 2008.
🦾 Garage-Calibrated Old-School High-Torque Struts: The ultimate mechanical cure for dead, leaking, or sagging 20+ year-old original factory manual gas shocks. Driven by dual reinforced thick-walled heavy-duty electric struts with custom structural brackets to effortlessly handle the heavy vertical tailgate.
🔋 Micro-Ampere Smart Sleep Vintage Battery Safeguard: Deeply optimized for legacy automotive electrical networks and aging smaller-capacity (35Ah) 12V classic car batteries. Incorporates a premium MCU sleep protocol that guarantees zero parasitic power drain.
🛠️ 100% Non-Destructive Clean Retrofit: True Premium Restoration Design for cherished JDM retro builds. Tailored with custom brackets and a clean plug-and-play wiring design—No crude wire cutting or irreversible structural drilling required, perfectly preserving the OEM collector value of your vehicle.
🔒 Silent Soft-Close Vacuum Suction Lock: Specially calibrated for the large open rectangular cabin volume and flat rear seal frame of the Spike series box van. Replaces the harsh, metal-on-metal factory manual slamming with a whisper-quiet, automated premium vacuum suction latch closure.
🛡️ Why Choose LiTanglee®?
- [100% OEM-Fit & Warranty Safe] Our plug-and-play harness uses original-style connectors for a non-destructive installation. For most supported vehicle models, no wire cutting or structural drilling is required. However, some special vehicles (such as heavy tailgates, vans, or models without factory-reserved mounting points) may require minor drilling or additional reinforcement brackets to ensure long-term structural strength, safety, and reliability. In a small number of older vehicle models or vehicles without factory-reserved electrical connectors, minor wire connections may also be required. These requirements depend entirely on your specific vehicle model and factory body design, and all vehicle-specific installation requirements will be clearly documented in the dedicated installation manual.
- [Remote Installation Support] Never get stuck during setup. Our professional technicians provide real-time online guidance via WhatsApp or Video Call to walk you through the installation process from start to finish.
- [Certified Quality] LiTanglee® systems are CE and RoHS certified, meeting the highest international safety and performance standards for automotive electronics.
- [12-Month Global Warranty] We stand behind our motion technology. Every kit includes a 1-year comprehensive warranty and lifetime technical support from our dedicated global service team.
⚠️ REQUIRED VEHICLE SPECIFICATION VERIFICATION
To ensure a flawless installation tailored to your specific market version, every order undergoes an essential engineering review. Please proactively send your vehicle's Brand, Model, Production Year, along with clear photos of your tailgate (opened & closed) to our support line immediately after placing your order to ensure perfect system configuration. Some vehicle models may require minor drilling, additional reinforcement brackets, or minor wire connections depending on the original factory body design and electrical configuration.
🛠️ LITANGLEE® OFFICIAL TECHNICAL RESOURCE CENTER
Master the system before you build. Our core tech logic and wiring principles are 90% identical across all 600+ models. Review our comprehensive resources below, and simply request your dedicated wiring diagram from our support team upon checkout.
🚗 ALREADY HAVE A POWER TAILGATE?
Upgrade to hands-free convenience with our vehicle-specific LiTanglee® Universal Kick Sensor 👉🏼
🔧 System Compatibility & Technical Specs Required:
- For Aftermarket Power Tailgates: Simply notify our support line after checkout that your vehicle is equipped with an aftermarket tailgate kit.
- For Original Factory Power Tailgates: Please provide your vehicle's Brand, Model, Production Year, and clear tailgate photos to receive the correct dedicated module.
📩 Official Support Email: yijiat2022@gmail.com
💬 WhatsApp Dedicated Line: +86 17620813377 (Click to Chat)
Share
