For Deepal G318 (C318 Platform) (2024-2026+) Electric Soft Close Door Upgrade Kit | LiTanglee

Global Premium EV Platform Certified Compatibility - LiTanglee
Vehicle Model	Market Specification / Drivetrain Architecture	Production Year	Status
Deepal G318 (C318 Platform)	Rugged Cyber-Offroad SUV | Deepal Intelligent EREV (Extended Range Electric Vehicle | LHD & RHD Specs)	2024, 2025, 2026, 2027	Certified Fit (All 4 Side Passenger Doors)

💡 IMPORTANT SYSTEM NOTE: This premium upgrade kit is designed exclusively as an UPGRADE to your original factory car lock mechanism. It does NOT replace your original primary OEM lock assembly. By seamlessly integrating with and retaining your factory lock, your vehicle's original smart crash-unlock safety certifications, central anti-theft electronics, high-voltage EREV battery cutoff response protocols, and mechanical internal emergency override cables remain 100% intact.

✨ Premium Intelligent Modification by LiTanglee

Add premium luxury and fluid closing mechanics to your cyber-offroad adventure rig with the Electric Soft Close Door Upgrade Kit For Deepal G318 / C318 Series. Meticulously engineered by LiTanglee to overcome the high backpressure inside the heavily sealed cabin structure of the G318 platform, this premium 4-door upgrade introduces fluid, silent suction mechanics that pull the heavy doors completely flush without requiring forceful slamming.

• 🤫 Heavy-Duty Whisper-Quiet Suction: The LiTanglee soft close door system features premium high-torque DC operating motors tailored for larger, rugged door frames. It pulls doors completely closed with whisper-quiet elegance, preserving your high-grade soundproof seals.
• 🛡️ OEM Lock Retention Architecture: Engineered to augment your vehicle's existing structural frame without removing the underlying factory lock block. It pairs perfectly with Deepal's smart keyless systems, hidden electronic door handles, and central logic networks without triggering BCM diagnostic faults.
  
• 🛠️ 100% Non-Destructive Installation: Designed specifically for clean, professional vehicle modifications. The kit features a fully plug-and-play wiring configuration with no wire cutting, drilling, or paint modifications required, leaving your original vehicle warranty fully protected.

🎥 LiTanglee Official Step-By-Step Installation Video

⚠️ DEEPAL G318 (C318) PLATFORM CRITICAL TECHNICAL INSTALLATION NOTICE

• Side Passenger Doors Only Notice: This upgrade kit is designed exclusively for the **4 side-swinging passenger doors**. It does NOT include or support components for the side-opening rear tailgate liner (spare tire swing door).
• Strict No-Load & Shipping Tie Warning: Never connect power to actuate or bench-test the system before the upgrade kit is completely bolted into the door framework. Running the system under zero-load conditions can permanently warp the lock mechanism. Ensure the shipping cable tie on the lock tongue is cut off before assembly.
• Sponge / Foam Strip Removal Required: Carefully inspect the OEM factory lock block. You MUST completely peel off the black factory sealing sponge/foam layer from the contact surface. If left intact, the sponge will bunch up inside the upgrade latch mechanism, creating immense mechanical friction that causes motor return or suction cycle failure.
• Bracket Tab Alignment: When integrating the upgrade lock unit with the custom-molded mounting bracket, make sure to slide the bracket tabs firmly into the designated lower slots. Ensure it does not slide out of alignment toward the upper frame before securing the screws.
• 无损对插取电 Window Lifter In-Line Interception: Power routing is fully localized. Unplug the factory wire harness connector from the power window lifter motor, and insert the LiTanglee inline T-Harness adapter directly between the factory socket and the motor to safely intercept fused 12V power. This isolates the kit entirely from the EREV powertrain control bus, preventing low-voltage battery faults or sleep cycle current drain.
• Chassis Isolated Grounding Path: The black ground (GND) wire must be secured directly to an authenticated, bare-metal factory chassis grounding bolt inside the door framework. Do not link to painted reinforcement brackets or tap into digital logic grounds to ensure complete isolation from the smart vehicle sensors.
• Heavy-Duty Door Cavity Window Clearance Pre-Test: Due to the robust, thick door panel architecture of the G318, interior space layout is precise. You must completely roll down the window glass manually after mounting the kit to visually verify that the descending glass frame completely clears the upgraded motor housing and bowden suction cables inside the door panel to prevent any rubbing or scratching during off-road travel.
• Rugged Weatherstripping Striker Adjustment: The Deepal G318 utilizes dense, heavy-duty weatherstripping for advanced dust, noise, and water isolation. If the secondary suction pull stops halfway or encounters heavy compression resistance, loosen the vehicle chassis door striker bolt slightly and move it outward by 0.5mm to achieve a fluid and effortless soft-closing cycle.

🛠️ LiTanglee Global Support

Access specialized wiring diagrams, installation manuals, and technical assistance for your LiTanglee electric soft close door upgrade.

📖 View Installation Guide Connect with Tech Team on WhatsApp