For GWM Tank 500 (P03) 2022-2026+ Electric Soft Close Door Upgrade Kit | LiTanglee

Global Premium SUV Platform Certified Compatibility - LiTanglee
Vehicle Model	Market Specification / Drivetrain Architecture	Production Year	Status
GWM Tank 500 (P03 Platform)	Luxury Mid-to-Large Off-Road SUV | Premium Longitudinal Body-on-Frame Architecture (Exclusively for 4 Side Passenger Doors)	2022, 2023, 2024, 2025, 2026, 2027	Certified Fit (All 4 Side Passenger Doors)

💡 IMPORTANT SYSTEM NOTE: This premium upgrade kit is designed exclusively as an UPGRADE to your original factory car lock mechanism. It does NOT replace your original primary OEM lock assembly. By seamlessly integrating with and retaining your factory lock, your vehicle's original luxury soft-touch features, emergency smart crash-unlock safety certifications, anti-theft properties, and mechanical internal override cables remain 100% intact.

✨ Premium Intelligent Modification by LiTanglee

Bring executive-tier quiet luxury and ultimate acoustic comfort to your flagship off-road vehicle with the Electric Soft Close Door Upgrade Kit For GWM Tank 500 (P03) Series. Meticulously engineered by LiTanglee to overcome the heavy compression resistance of elite acoustic seals, this premium 4-door upgrade introduces fluid, intelligent suction mechanics that draw the massive passenger doors completely flush without forceful slamming.

• 🤫 Executive Silent Suction Mastery: The LiTanglee soft close door system features premium high-torque DC operating motors that smoothly pull your vehicle's doors shut with whisper-quiet elegance, successfully removing the need for loud slamming and preserving your door seals.
• 🛡️ OEM Lock Retention Architecture: Engineered to augment your vehicle's existing structural frame without removing the underlying factory lock block. It pairs perfectly with the P03 platform's advanced proximity smart keys, central locking encryption, and interior electronic lock nodes without triggering diagnostic dashboard faults.
  
• 🛠️ 100% Non-Destructive Installation: Designed specifically for clean, professional vehicle modifications. The kit features a fully plug-and-play wiring configuration with no wire cutting, drilling, or paint modifications required, leaving your original vehicle warranty fully protected.

🎥 LiTanglee Official Step-By-Step Installation Video

⚠️ GWM TANK 500 (P03) PLATFORM CRITICAL TECHNICAL INSTALLATION NOTICE

• Side Passenger Doors Only Notice: This upgrade kit is designed exclusively for the **4 side-swinging passenger doors**. It does NOT include or support components for the rear cargo tailgate (which may already feature factory electronic suction options depending on the regional trim level).
• Strict No-Load & Shipping Tie Warning: Never connect power to actuate or bench-test the system before the upgrade kit is completely bolted into the door framework. Running the system under zero-load conditions can permanently warp the lock mechanism. Ensure the shipping cable tie on the lock tongue is cut off before assembly.
• Sponge / Foam Strip Removal Required: Carefully inspect the OEM factory lock block. You MUST completely peel off the black factory sealing sponge/foam layer from the contact surface. If left intact, the sponge will bunch up inside the upgrade latch mechanism, creating immense mechanical friction that causes motor return or suction cycle failure.
• Bracket Tab Alignment: When integrating the upgrade lock unit with the custom-molded mounting bracket, make sure to slide the bracket tabs firmly into the designated lower slots. Ensure it does not slide out of alignment toward the upper frame before securing the screws.
• 无损对插取电 Window Lifter In-Line Interception: Power routing is fully localized. Unplug the factory wire harness connector from the power window lifter motor, and insert the LiTanglee inline T-Harness adapter directly between the factory socket and the motor to safely intercept fused 12V power.
• P03 Platform Isolated Grounding: The black system ground (GND) wire must be secured directly to a main structural metal chassis grounding bolt inside the door framework. Avoid connecting to loose bracket rivets or tapping into secondary logic grounds, as the Tank 500's advanced multiplex CAN-bus modules are highly sensitive to impedance disruptions.
• Double-Laminated Heavy Glass Cavity Clearance Pre-Test: The Tank 500 utilizes thick, double-layered acoustic glass panes that lower deep into the door shell. You must completely roll down the window glass manually after mounting the kit to visually verify that the moving glass frame completely clears the newly upgraded motor housing and suction cables inside the cavity.
• Flagship Triple Dust Seals Striker Adjustment: Due to the heavy triple-layer rubber weatherstripping utilized on the Tank 500 for elite soundproofing, the door requires precise latching tolerances. If the secondary suction pull stops halfway or encounters heavy structural resistance, loosen the vehicle chassis door striker bolt slightly and move it outward by 0.5mm to achieve a fluid and effortless soft-closing cycle.

🛠️ LiTanglee Global Support

Access specialized wiring diagrams, installation manuals, and technical assistance for your LiTanglee electric soft close door upgrade.

📖 View Installation Guide Connect with Tech Team on WhatsApp