LiTanglee Motion Tech
For Honda Odyssey RB3 Series 2008-2014 Smart Power Tailgate Lift Kit by LiTanglee® | Smart Electric Trunk Opener | Fits Odyssey Absolute, M, L, Luxury Trims, RB3 Chassis | Dual Struts | CE Certified
For Honda Odyssey RB3 Series 2008-2014 Smart Power Tailgate Lift Kit by LiTanglee® | Smart Electric Trunk Opener | Fits Odyssey Absolute, M, L, Luxury Trims, RB3 Chassis | Dual Struts | CE Certified
Impossible de charger la disponibilité du service de retrait
TECHNICAL SPECIFICATIONS (HONDA ODYSSEY RB3 CLASSIC MPV ARCHITECTURE)
| Vehicle Platform | Honda 4th Generation Low-Roof Sporty MPV Architecture (Exclusively for Chassis Code: RB1-Universal Specific Evolution / RB3 2WD Series) |
| Body Configuration | Exclusively Tailored for Front-Wheel Drive (2WD) RB3 Models (Not Compatible with 4WD RB4 Models due to different rear floor pan liftgate geometry hinges) |
| Powertrain Type | 2.4L K24A DOHC i-VTEC High-Output Petrol Performance Engine Integration Linkage |
| Global Trim Compatibility | Odyssey Absolute Spec, M Spec, L Spec, Li Premium Spec (Global Manual Rear Boot Liftgate Retrofit) |
| Model Years Covered | 2008, 2009, 2010, 2011, 2012, 2013, 2014 (Full Generational Lifecycle Run Matrix Lock) |
| Strut Reinforcement | Classic Wagon-Specific Extra-Durable Silent Heavy-Duty Dual Electric Struts + Dedicated RB3 Smart Micro-AMP MCU Control Box + Tailored Low-Roof Geometry Brackets |
| Control Interface | Original Remote Key Fob Button Linkage (via precise unlock signal timing), Drivers Side Dashboard Custom Switch Retrofit, Add-on Inner Boot Lid Switch Premium Switch Pod, Hands-Free Smart Foot Kick Sensor (Optional Add-on) |
🌍 Odyssey RB3 JDM Platform Precision Fit: Masterfully custom-engineered specifically for Honda's legendary 4th generation low-roof luxury MPV platform. Flawlessly fits all Honda Civic / Odyssey RB3 Chassis variants from 2008 to 2014 across global JDM, Asian, and Oceania regional specifications.
🦾 Old-Car Restoration High-Torque Struts: The ultimate replacement for aging, leaking, and saggy original factory manual gas shocks. Powered by dual reinforced heavy-duty electric struts with thick-walled steel casings to reliably automate and smooth out the massive rear door lift.
🔋 Micro-Ampere Smart Sleep Battery Safeguard: Specially optimized to interface perfectly with aging 12V automotive networks and tired classic car batteries. Features a premium micro-ampere MCU sleep protocol that guarantees zero parasitic power drain, preventing overnight battery discharge or ignition failure.
🛠️ 100% Non-Destructive Bolt-On Installation: True Premium Retrofit Design for cherished classic vehicles. Engineered with premium custom mounting brackets and original-standard vehicle harness connectors—No wire cutting, splicing, or mechanical structural drilling required, keeping your classic chassis 100% factory clean.
🔒 Silent Soft-Close Vacuum Suction Lock: Custom-tuned for the unique sealing geometry and dense low-slung cabin volume of the RB3 series wagon. Combines specialized smooth soft-start logic with a top-tier premium vacuum latch mechanism, completely replacing the loud factory metallic slamming with premium closure.
🛡️ Why Choose LiTanglee®?
- [100% OEM-Fit & Warranty Safe] Our plug-and-play harness uses original-style connectors for a non-destructive installation. For most supported vehicle models, no wire cutting or structural drilling is required. However, some special vehicles (such as heavy tailgates, vans, or models without factory-reserved mounting points) may require minor drilling or additional reinforcement brackets to ensure long-term structural strength, safety, and reliability. In a small number of older vehicle models or vehicles without factory-reserved electrical connectors, minor wire connections may also be required. These requirements depend entirely on your specific vehicle model and factory body design, and all vehicle-specific installation requirements will be clearly documented in the dedicated installation manual.
- [Remote Installation Support] Never get stuck during setup. Our professional technicians provide real-time online guidance via WhatsApp or Video Call to walk you through the installation process from start to finish.
- [Certified Quality] LiTanglee® systems are CE and RoHS certified, meeting the highest international safety and performance standards for automotive electronics.
- [12-Month Global Warranty] We stand behind our motion technology. Every kit includes a 1-year comprehensive warranty and lifetime technical support from our dedicated global service team.
⚠️ REQUIRED VEHICLE SPECIFICATION VERIFICATION
To ensure a flawless installation tailored to your specific market version, every order undergoes an essential engineering review. Please proactively send your vehicle's Brand, Model, Production Year, along with clear photos of your tailgate (opened & closed) to our support line immediately after placing your order to ensure perfect system configuration. Some vehicle models may require minor drilling, additional reinforcement brackets, or minor wire connections depending on the original factory body design and electrical configuration.
🛠️ LITANGLEE® OFFICIAL TECHNICAL RESOURCE CENTER
Master the system before you build. Our core tech logic and wiring principles are 90% identical across all 600+ models. Review our comprehensive resources below, and simply request your dedicated wiring diagram from our support team upon checkout.
🚗 ALREADY HAVE A POWER TAILGATE?
Upgrade to hands-free convenience with our vehicle-specific LiTanglee® Universal Kick Sensor 👉🏼
🔧 System Compatibility & Technical Specs Required:
- For Aftermarket Power Tailgates: Simply notify our support line after checkout that your vehicle is equipped with an aftermarket tailgate kit.
- For Original Factory Power Tailgates: Please provide your vehicle's Brand, Model, Production Year, and clear tailgate photos to receive the correct dedicated module.
📩 Official Support Email: yijiat2022@gmail.com
💬 WhatsApp Dedicated Line: +86 17620813377 (Click to Chat)
Share
