OEM Power Tailgate Kick Sensor Installation Guide | Hands-Free Open & Close Wiring Instructions

Installation Video: Finding Negative Trigger Wires

Must Watch: Master the signal detection method before connecting wires.

OEM Power Tailgate Kick Sensor Wiring Instructions

This guide explains how to install a hands-free kick sensor on a factory/OEM power tailgate system.

Wiring Connection Instructions

• 1. ACC Power (Ignition Power) - [接ACC]
  Connect this wire to the vehicle's ACC power source.
• 2. Constant Positive (+12V) - [接常通正极]
  Connect this wire to the vehicle's constant positive power supply (+12V).
• 3. Trunk Lamp Power (5-12V) - [尾箱照明灯线5-12V]
  Connect this wire to the trunk/tailgate lamp power wire.
• 4. Tailgate Close Switch Negative Trigger - [接尾门开关负触发线]
  Connect this wire to the original tailgate open switch negative trigger wire. 
  [Click Here] Detection method video tutorial and kick sensor mounting guide. If you need further assistance, click here.
• 5. Trunk External Button Negative Trigger - [接尾箱外扣手负触发]
  Connect this wire to the external trunk button negative trigger wire.
• 6. Ground (Negative) - [负极(搭铁)]
  Connect this wire to the vehicle ground point.