OEM Power Tailgate Kick Sensor Installation Guide | Hands-Free Open & Close Wiring Instructions

18 de julio de 2026

Must Watch: Master the signal detection method before connecting wires.

OEM Power Tailgate Kick Sensor Wiring Instructions

This guide explains how to install a hands-free kick sensor on a factory/OEM power tailgate system.

1. ACC Power (Ignition Power) - [接ACC]
Connect this wire to the vehicle's ACC power source.
2. Constant Positive (+12V) - [接常通正极]
Connect this wire to the vehicle's constant positive power supply (+12V).
3. Trunk Lamp Power (5-12V) - [尾箱照明灯线5-12V]
Connect this wire to the trunk/tailgate lamp power wire.
4. Tailgate Close Switch Negative Trigger - [接尾门开关负触发线]
Connect this wire to the original tailgate open switch negative trigger wire.
[Click Here] Detection method video tutorial and kick sensor mounting guide. If you need further assistance, click here.
5. Trunk External Button Negative Trigger - [接尾箱外扣手负触发]
Connect this wire to the external trunk button negative trigger wire.
6. Ground (Negative) - [负极(搭铁)]
Connect this wire to the vehicle ground point.